Spot 2800W Electric Radiant Heater
No Aggressive Red Light - Produces
a very ambient modest light
HEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters. The reduced light output is due to the use of a color matching grill screen in front of the satin surface carbon heating elements that can be either a black or white. They are midwave radiant heaters that produce heat almost instantly (less than 15 seconds) and are ideal for providing heat to outdoor areas such as partially open patios or balconies.
Configure & BuyBuy online and get it delivered to your door.
Efficiency Made Simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & Cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No Aggressive Red Light
Produces a very ambient, modest light based on double carbon heating elements.
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
Our radiant heaters come with an industry leading two-year limited warranty.
AccessoriesIncludes everything you need to easily operate and protect your investment for many years to come.
How long is the warranty period?
All HEATSCOPE® products are covered by a 2-year warranty from the date of purchase. Please see our Manufacturer’s Warranty statement for further details.
Can I install my HEATSCOPE® vertically?
Pure is the only heating system that can be installed vertically or horizontally. Spot and Vision can only be installed horizontally. Please review the installation manual for further instructions.
Can my radiant heater be installed near a power outlet?
The heater cannot be installed directly below a power source or socket. The sides of the unit must be at least 20cm from the nearest power source. For further details, please refer to the installation manual.
Can I install the HEATSCOPE® heater in my bathroom?
Spot and Vision models must not be installed in or near areas where there is high level of humidity such as bathrooms, spas, bathtubs, showers, or pools. However, Pure is rated IP65 with a higher level of protection against water and can be installed in and near these spaces.
Can I install HEATSCOPE® infrared heaters directly to a power source?
Most of the time when an electrician installs the HEATSCOPE® heater the power cable will be connected directly to the electrical grid. The resulting electrical circuit is then turned on and off using a dedicated switch. Each heater must have its own fuse.
How does the remote control work?
The intuitive remote control allows you to easily turn multiple HEATSCOPE® units on and off with the simple touch of a button.
Are there any guidelines that I must follow to install the radiant heater?
Your electrician must follow the installation instructions set by the manufacturer, and make all connections in accordance with AS/NZS 3000:2018 Wiring rules. Please refer to the installation manual.
How many amperes does HEATSCOPE® radiant heaters draw?
- Spot 1600W – 13.91 amps at 100% power
- Spot 2800W – 12.17 amps at 100% power
- Vision 3200W – 13.91 amps at 100% power
- Pure 2400W – 10.43 amps at 100% power
How Can We
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.Live Chat
From product selection, to material sourcing, and project reviews, our team is here to help.
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
Can't make it to our showroom? Book an online consultation with our team of specialists.
Smart pricing, personalised support and unparalleled creative freedom.
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.